> 제품 리스트 > 오버 헤드 크레인 > 단 하나 대들보 교량 기중기 > 10t 단일 거더 서스펜션 오버 헤드 크레인 가격
  • 10t 단일 거더 서스펜션 오버 헤드 크레인 가격
  • 10t 단일 거더 서스펜션 오버 헤드 크레인 가격
  • 10t 단일 거더 서스펜션 오버 헤드 크레인 가격
  • 10t 단일 거더 서스펜션 오버 헤드 크레인 가격
  • 10t 단일 거더 서스펜션 오버 헤드 크레인 가격
  • 10t 단일 거더 서스펜션 오버 헤드 크레인 가격

10t 단일 거더 서스펜션 오버 헤드 크레인 가격

  • $800
    1-0
    Set/Sets
  • $4700
    ≥1
    Set/Sets
지불 유형:
L/C,T/T,Paypal,Western Union
인 코텀:
FOB,CFR,CIF,EXW,FCA,CPT
최소 주문량:
1 Set/Sets
수송:
Ocean,Land,Air
포트:
Qingdao Port,Tianjin Port,Shanghai Port
Share:
  • 제품 설명
Overview
제품 속성

모형LDC, LD, LDP, HD

상표DGCrane

공급 능력 및 추가 정보

포장전기 호이스트는 합판 상자 케이스로 포장되고 다른 것은 부직포로 포장됩니다.

생산력1500sets/month

수송Ocean,Land,Air

원산지중국

지원에 대한 지원18000 sets/year

인증 ISO

HS 코드84261120

포트Qingdao Port,Tianjin Port,Shanghai Port

지불 유형L/C,T/T,Paypal,Western Union

인 코텀FOB,CFR,CIF,EXW,FCA,CPT

포장 및 배송
판매 단위:
Set/Sets
포장 종류:
전기 호이스트는 합판 상자 케이스로 포장되고 다른 것은 부직포로 포장됩니다.

10 t 단일 거더 서스펜션 오버 헤드 크레인 가격에 대한 간략한 소개

단일 빔 오버 헤드 크레인 은 트롤리와 호이스트를지지하는 하나의 교량 거더가있는 천장 교량 크레인입니다. 트롤리와 호이스트는 교량 대들보의 하단 플랜지에 있습니다. 단일 빔 ovehread 크레인은 브리지 거더가 활주로 빔 위에 올라갈 때 최고 주행으로 간주됩니다.

신청 :이 크레인은 일반적으로 작업장, 공장, 창고 등과 같은 실내에서 물품을 들어 올리는 데 사용됩니다. 가연성, 폭발성 또는 부식성 환경에서 장비를 사용하는 것은 금지되어 있습니다.

1ton overhead crane
  • 다양한 작업장 조건을위한 솔루션

1ton overhead crane

낮은 헤드 룸 유형 단일 거더 브리지 크레인

브래킷에서지면까지 높이가 제한된 창고가 있지만 더 높은 리프팅 높이가 필요하면 사각형 상자 거더와 낮은 헤드 룸 호이스트로 크레인을 설계하여 리프팅 높이가 더 높을 것입니다.

1ton overhead crane

서스펜션 유형 단일 거더 브리지 크레인

일부 창고의 경우 천장에 콘크리트 보가 있지만 기둥이 없습니다. 실제적인 필요에 따라 오버 헤드 크레인이 필요하므로 지붕이 충분한 무게를 견딜 수 있다면 콘크리트 빔에 매달리는 현 가식 크레인을 제안 할 것입니다.

1ton overhead crane

유럽식 단일 거더 브리지 크레인

첨단 제품의 작업장이나 저소음이 필요한 경우 유럽식 크레인을 권장합니다.

overhead crane design

사이드 행잉 타입 싱글 거더 브릿지 크레인

일부 창고 에서는 기둥 높이가 제한되어 있지만 기둥 상단에서 천장까지 많은 공간이 있습니다. 이 조건에 따라 사이드 행잉 호이스트가있는 사이드 행잉 타입 크레인을 제공하여 리프팅 높이를 높입니다.

  • 자세한 구성 요소 설명

overhead crane design

overhead crane design

Monorail Single Girder Bridge Crane

  • 생산 흐름

overhead crane design

Incoming  material 

test

Every batch of raw materials must be tested when they enter the factory. We set up a special testing room.It covers non-destructive inspection room, metallographic analysis and hardness inspection room, mechanics inspection and chemical inspection room. Testing methods has non-destructive testing,metallographic analysis, mechanical testing and chemical analysis, mainly testing and control of the raw materials, crane components, product

Uncoiling 

and flattening the steel plate  

After uncoiling, leveling, sizing and shearing, the required length and width of the flat sheet can  be obtained, which can protect the flat sheet without scars, high shearing accuracy, double palletizing and discharging, high efficiency and speed.
Pressure    Groove  According to crane specifications to groove pressing with different model, and main girder forming at one time can realize that the U-groove of the whole main girder of single girder crane has no butt weld, thus reducing stress concentration point, improving the strength and stiffness of the main girder, and greatly improving the comprehensive bearing capacity of the main girder.
Welding  Stiffener There is a support which can keep the main girder be not deformed, and workers can work easily without bending.
Welding main beam with the ending     
Welding I  beam and  ventral            Submerged arc welding (SAW) is a kind of protective welding with Rohm double gun automatic welding, which has the advantages of full weld, deep molten pool, beautiful shape and high welding quality. At the same time, the welding distortion is reduced.
Checking  span,welding  flange In production, the hanging plates of the main girder and the end girder are processed together, punched together, and then knock down from end beam and weld to the main girder.
Painting Two-layer primer, two-layer paint

  • 포장 및 배송

Steel parts Steel parts are packed in polythene woven cloth, which can prevent rainwater from directly contacting the crane and protect the painting
Electric parts and hoist Electric parts are packed by strong plywood crate case, which plays a protective and moistureproof role.

  • 설치 사례

overhead crane design
overhead crane design
overhead crane design

  • 가격 을 얻는 데 필요한 정보

Basic informations needed of single girder overhead crane 1. Capacity:_  ( max weight of material)
2. Span:_ ( rail center to rail center)
3. Lifting height:_ ( from ground to hook)
4. Crane traveling length:_m
5. What goods will the crane lift?
6. Working environment:
7. Speed requirement:
8. Comtrol method: control pendent, remote control, cabin control ( normally choose controll pendent and remote control)  

제품 디렉토리 : 오버 헤드 크레인 > 단 하나 대들보 교량 기중기

다운로드
> 제품 리스트 > 오버 헤드 크레인 > 단 하나 대들보 교량 기중기 > 10t 단일 거더 서스펜션 오버 헤드 크레인 가격
이 업체에게 이메일로 보내기
  • *제목:
  • *에:
    Mr. Michael
  • *이메일:
  • *메시지:
    귀하의 메시지 20-8000 자 사이 여야합니다
질문 보내기
*
*

홈페이지

Product

Phone

우리에 대해

문의

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

송신